Services
| Firearms Transfer | $30 (Multiple is an additional $10 after the first) |
| Firearm Shipping: | $15 + Materials and Carrier Fees |
| NICS Check | $10 |
| Per Man Hour | $60 |
| Per Man & Machine Hour | $85 |
| Minimum Charge Per Firearm | $35 |
Cleaning and Inspection
| Basic Field Cleaning and lubrication on Simple Firearms | $60 |
| Basic Field Cleaning and lubrication on More Complex/ Antique Firearms | $85 |
| Detailed Cleaning of simple firearms (Full breakdown, inspection, lubricate, and clean) | $120 |
| Detailed Cleaning of complex modern firearms (Full breakdown, inspection lubricate, and clean) | $195 |
| Detailed Cleaning/Safety Inspection on Antique or military firearms (Full breakdown, safety inspection and clean) | $220 |
| Detailed Cleaning/Safety Inspection of Waterfowl Shotguns (Full breakdown, safety inspection and clean) | $220 |
Firearms Repair
| General Firearm Repair (Minimum 1 man hour) plus parts if needed | $60/hour + Parts |
| Test Firing | (Cost dependent on round) |
Misc. Gunsmithing
| Assembly of "a box of parts" | $150 + $60/hr |
| Remove Stuck Cartridge | Spent $55 +Possible Hourly Charge |
| Remove Stuck Cartridge | Unspent $100 +Possible Hourly Charge |
| Warranty Return | $15 + Materials and Carrier Fees |
| Special Order Fee | $25 + Part Cost (Finding and ordering specialty parts for customers) |
| Simple Trigger work aka: | $150 + Parts and Consent and Liability Release (Includes kit and install. May require re-working factory parts and may also include installing lighter springs) |
| Complex Trigger work aka: | Trigger Job" $250 + Parts and Consent and Liability Release (Includes kit and install. May require re-working factory parts and may also include installing lighter springs) |
| Rust Bluing (Complete Firearm) | $650 (This includes full breakdown, cleaning, inspections, photo indexing, reassembly, lubrication and test fire.) |
| Other types of bluing and coating | $135 - $210 + Outsource cost (This includes full breakdown, cleaning, inspections, photo indexing and shipping to our coating supplier, reassembly, lubrication, and test fire.) |
AR15/AR10/LR308/AR308 Specific Work
| Assemble Lower Parts Kit | $60 + Parts |
| Assemble Upper Parts Kit | $85 + Parts |
| Assemble Complete Rifle from Parts Kit (Customer Provided Parts) | $165 |
| Assemble Complete Rifle from Parts Kit | $225 + Parts |
| Install AR Trigger Kit | $60 + Parts |
| Install Muzzle Device with crush washer | $35 + Parts |
| Install Timed Muzzle Device with shims | $60 + Parts |
| Pin and Weld Muzzle Device | $75 |
| Install Furniture | $60/Hour |
Stock Work
| General Inletting and Stock Fitting | $120 |
| Install Drop in Rifle Stock that requires no fitting | $60 |
| Install Rifle Stock that requires fitting | $180 |
| Install Grind-To-Fit Recoil Pad | $75 + Parts |
| Repair Cracked Wooden Stock Repair | $30 + $60/hr (Rifle will need to be checked in and inspected prior to any quote being given) |
| Damage in Synthetic Stock and Refinish | $350 (minimum, single color finish, composite stocks only, will inspect and quote) |
| Glass Bedding - Recoil Lug Area Only | $200 |
| Glass Bedding - Full Action Bedding | $400 (from recoil lug to rear tang, does not include bedding pillars, requires stock refinishing [not included) |
| Bedding Pillar installation | $200 (requires stock refinishing [not included) |
| Re-cut Factory Checkering, Grip Panels | $250 |
| Re-Cut Factory Checkering, Forend Panels | $375 |
Long Gun Site and Optic
| Boresight Optic | $65 |
| Mount & Boresight Optic | $75 + Parts |
| Scope Ring Lapping, Mount & Boresight Optic | $120 + Parts |